High-Quality Slurry Pump Spare Parts Factory – Spare Parts – Panlong
High-Quality Slurry Pump Spare Parts Factory – Spare Parts – Panlong Detail:
1.Warman slurry parts:
Slurry Pump Wet Ends are the wearable parts involved in a Pump. Panlong Heavy Duty parts are 100% interchangeable with OEM. Replacement Parts can be ordered in either High Chrome or Rubber depending on your pump assembly.
Spare parts can be fabricated in a number of different materials including metal, rubber or polyurethane, as well as specialty alloys designed to increase the wear life of your parts.
Options include, but are not limited to 27%~35% high chrome parts, various rubber liners, and polyurethane parts.
components
Pos. | Basic Part Number | Description | Pos. | Basic Part Number | Description |
1 | 001 | Adjusting Screw or Adjusting | 37 | 061 | Labyrinth Locknut |
2 | 003 | Base | 38 | 062 | Labyrinth |
3 | 004 | Bearing Housing | 39 | 063 | Lantern Ring |
4 | 005 | Bearing Assembly | 40 | 064 | Impeller O-Ring |
5 | 008 | Bearing Sleeve | 41 | 067 | Neck Ring |
6 | 009 | Bearing | 42 | 070 | Shaft Key |
7 | 009D | Bearing (Drive End) | 43 | 073 | Shaft |
8 | 011 | Clamp Washer | 44 | 075 | Shaft Sleeve |
9 | 012 | Clamp Bolt | 45 | 078 | Stuffing Box |
10 | 013 | Cover Plate | 46 | 079 | Expeller Ring Stud |
11 | 015 | Cover Plate Bolt | 47 | 083 | Throatbush |
12 | 017 | Cover Plate Liner | 48 | 085 | Cotter |
13 | 018 | Cover Plate Liner – Throatbush Type | 49 | 089 | Bearing Seal |
14 | 023 | Cover Plate Liner Set Screw or Stud | 50 | 090 | Shaft Seal |
15 | 024 | End Cover | 51 | 108 | Piston Ring |
16 | 025 | Shim Set | 52 | 109 | Shaft Sleeve O-Ring |
17 | 026 | Frame Plate Liner Stud | 53 | 110 | Volute Liner |
18 | 027 | End Cover Set Screw | 54 | 111 | Packing |
19 | 028 | Expeller | 55 | 117 | Shaft Spacer |
20 | 029 | Expeller Ring | 56 | 118 | Lantern Restrictor |
21 | 029R | Expeller Ring (Rubber Lined) | 57 | 122 | Seal Ring |
22 | 032 | Frame Plate | 58 | 124 | Volute Liner Seal |
23 | 034 | Frame Plate Bolt | 59 | 125 | Volute Liner Seal |
24 | 036 | Frame Plate Liner | 60 | 126 | Gland Clamp Bolt |
25 | 039 | Frame Plate Stud | 61 | 127 | Impeller – Five Vane Open |
26 | 040 | Frame Plate Liner Insert Bolt | 62 | 132 | Discharge Joint |
27 | 041 | Frame Plate Liner Insert | 63 | 137 | Impeller – Three Vane Closed |
28 | 044 | Gland | 64 | 138 | Grease Cup Adaptor |
29 | 045 | Gland Bolt | 65 | 145 | Impeller – Four Vane Closed |
30 | 046 | Grease Retainer | 66 | 147 | Impeller – Five Vane Closed |
31 | 049 | Impeller – Eight Vane Closed | 67 | 179 | Shaft Sleeve Spacer |
32 | 051 | Impeller – Two Vane Open | 68 | 191 | Impeller – Eight Vane Open Torque Cyclo |
33 | 052 | Impeller – Three Vane Open | 69 | 217 | Impeller O-Ring |
34 | 056 | Impeller – Four Vane Open | 70 | 239 | Release Collar |
35 | 058 | Impeller – Six Vane Open | 71 | 241 | Lip Seal Gland |
36 | 060 | Intake Joint |
2.Sulzer spare parts:
Materials: Duplex stainless steel ASTM A890 Grade 3A/ ASTM A890 Grade 1B/ ASTM A890 Grade 5A.Austenitic stainless steel is also available in various.
Impeller design: Closed, semi-open, or open impeller,also available in many other design such as Low pulse impeller/ Special open impeller/ Vortex impeller/ Non-clogging closed (channel type) impeller/ Wear-resistant open impeller.
components
Part # |
Description |
Part # |
Description |
Part # |
Description |
Part # |
Description |
102 | Pump casing | 412.4 | O-Ring | 562.1 | Pin | 901.1 | Screw |
135 | Wear Plate | 412.5 | O-Ring | 604 | Expeller | 902.1 | Screw |
161 | Cover for mechanical seal and packing | 412.6 | O-Ring | 636 | Grease nipple | 903.1 | Plug |
161.2 | Cover for dynamical Seal | 412.7 | O-Ring | 685 | Guard end | 903.2 | Plug |
183 | Support feed | 412.8 | O-Ring | 686 | Guard end | 903.3 | Plug |
210 | Shaft | 423 | Labyrinth ring | 686.3 | Guard end | 903.4 | Plug |
230 | Impeller | 423.2 | Labyrinth ring | 723 | Flange for mechn. Seal | 903.5 | Plug |
320.1 | Bearing | 433 | Mechn. Seal | 840 | Coupling | 904 | Stud |
320.2 | Bearing | 435 | Gasket | 890 | Baseplate | 909 | Screw |
330 | Bearing housing | 451 | Stuffing box housing | 901.1 | Screw | 914.1 | Screw |
344 | Frame adaptor | 452 | Packing gland | 901.2 | Screw | 920.2 | Nut |
360 | Bearing cover | 456 | Bushing | 901.3 | Screw | 920.3 | Nut |
400.1 | Gasket | 458 | Lantern ring | 901.4 | Screw | 923 | Nut for bearing |
400.2 | Gasket | 461 | Soft packing | 901.5 | Screw | 931 | Washer |
400.3 | Gasket | 471.2 | Gland | 901.6 | Screw | 940 | Key |
412.1 | O-Ring | 475 | Sealing ring | 901.7 | Screw | 918 | Screw for baseplate |
412.2 | O-Ring | 507 | Deflector | 901.8 | Screw | 920.4 | Nut |
412.3 | O-Ring | 524 | Shaft sleeve | 901.9 | Screw |
3.Andritz spare parts:
Materials: Cast iron; stainless steel; highly wear-resistant,hardened stainless steel
Impeller design: Closed, semi-open, or open impeller,also available in highly wear-resistant design
components
NO. |
Q’TY |
PART NAME |
NO. |
Q’TY |
PART NAME |
1 |
1 |
pump body |
23 |
1 |
cylindrical roller bearing |
2 |
1 |
rear wearing lining |
24 |
1 |
bearing cover (pump end) |
3 |
1 |
front wearing lining |
25 |
1 |
water retaining ring |
4 |
1 |
impeller |
26 |
1 |
mech. seal (AK5M type) (Si) Si |
5 |
1 |
locking gasket |
27 |
1 |
pump cover |
6 |
1 |
impeller nut |
28 |
1 |
rotating ring |
7 |
1 |
Key (pump end) |
29 |
1 |
mech. seal MG type (k/si) |
8 |
1 |
packing ring |
30 |
1 |
mech. seal gland |
9 |
1 |
packing gland |
31 |
1 |
mech. seal MG type (k/si) |
10 |
1 |
shaft sleeve |
32 |
1 |
pump cover for packing seal |
11 |
1 |
shaft |
33 |
1 |
backstop bracket |
12 |
1 |
oil drain plug |
34 |
1 |
lock sheet |
13 |
1 |
oil cup |
35 |
1 |
supporting ring |
14 |
1 |
triangular bracket |
36 |
1 |
rear wearing lining for dynamic seal |
15 |
2 |
skeleton oil seal |
37 |
1 |
pump cover for dynamic seal |
16 |
1 |
key (coupling end) |
38 |
1 |
expeller |
17 |
1 |
round nut |
39 |
1 |
supporting ring for dynamic seal |
18 |
1 |
backstop gasket |
40 |
1 |
PTFE sealing ring |
19 |
1 |
bearing cover (coupling end) |
41 |
1 |
adjustment ring |
20 |
2 |
angular contact ball bearing |
42 |
1 |
bearing for dynamic seal |
21 |
1 |
cantilever frame |
43 |
1 |
backstop gasket |
22 |
1 |
vent plug |
44 |
4(5) |
packing |
Product detail pictures:
Related Product Guide:
We support our prospective buyers with ideal top quality merchandise and superior level provider. Becoming the specialist manufacturer in this sector, we have now attained abundant practical expertise in producing and managing for High-Quality Slurry Pump Spare Parts Factory – Spare Parts – Panlong , The product will supply to all over the world, such as: United Kingdom, Karachi, Finland, They are sturdy modeling and promoting effectively all over the world. Never ever disappearing major functions within a quick time, it's a have to in your case of fantastic good quality. Guided by the principle of Prudence, Efficiency, Union and Innovation. the corporation. ake an excellent efforts to expand its international trade, raise its organization. rofit and raise its export scale. We've been confident that we've been going to have a bright prospect and to be distributed all over the world in the years to come.
By Nicole from kazan - 2018.10.31 10:02
Managers are visionary, they have the idea of "mutual benefits, continuous improvement and innovation", we have a pleasant conversation and Cooperation.
By Nainesh Mehta from Comoros - 2017.03.08 14:45